Please read this about the new CVA ramrods and way it used.
October 17, 2023 Caleb Andrews Press Release - CVA Ramrod Design Change - Female Thread Update CVA Ramrod Design Change - Female Thread Update
The new CVA Palm Saver ramrods (as of 2022) no longer have a female threaded end on the loading end. The ramrods included with the muzzleloaders also no longer come with an extension jag, although this may still stated in the original muzzleloader manual.
This is an intentional redesign from CVA, as the female threads had the tendency to 'pull' out the bullet after it was seated, but only in the event that you weren't using a loading jag. Due to this, they have changed it to have a 'built-in' loading contour that allows you to push down muzzleloader bullets including the new PowerBelt ELR bullets, without the 'threads' pulling the bullet back out.
There is a female thread on the 'male' PalmSaver attachment. However, this also means that you will no longer able to install a loading jag and the PalmSaver attachment at the same time.
The bottom line, the new CVA ramrod change is not a defect as this design change was intentional. All of the CVA ramrods going forward, for all rifle models, will no longer have threads on both ends.
We do understand that this has created some confusion among our customer base who have purchased new CVA products. We are also now carrying an alternative replacement ramrod with the original OEM design with female 10/32" threads on both ends. Keep in mind that the replacement Muzzle-Loaders.com rods do not come with the Palm Saver or loading jag, but are able to accept both.
It may be beneficial to have a range rod or other sturdy rod to use while at the range or when cleaning your muzzleloader. The intention for the under mount rod is to be available for a 'second chance' hunting scenario where you don't have as much time to get a jag and range rod ready to load. If you are finding that this rod is too short for most of your needs, then a second range rod might be a good option to have for the more rigorous cleaning and loading methods.
As always, if you have any questions please contact our customer service team at 1-855-236-5000 or via email at [email protected]
Ramrod Information (ramrod only)
*Cleaning Jag and Palmsaver sold separately*
Wolf 24"---30886
Optima V2 26"----30884
Optima V2 LR 28"----32579
Accura MR 25"----30901
Accura V2 27"----30888
Accura PR 28"----32579
Accura V2 LR 30"----32308
Ramrod Information (Palmsaver)
Accura V2 LR 30" ----AC1712
Accura PR Optima V2 LR 28"----AC1704
Accura V2 27"----AC1700
Optima V2 26"----AC1701
Accura MR 25"----AC1702
Wolf 24"----AC1703
CVA 100 (2" DIA) CLEANING PATCHES AC1455A
2" Cleaning Patches
$
7.99
CVA 100 SHTNG PATCHS (.50-.58 CAL) AC1447
100 Shooting Patches for .50-.58 Cal
$
3.99
CVA 200 (2" DIA) CLEANING PATCHES AC1455B
200 2" diameter Cleaning Patches
$
9.99
CVA PRELUBED SHOOTING PATCHES -200 AC1439A
CVA Prelubed Shooting Patches
$
12.99
CVA NW BREECHPLUG TOOL 32182
For use installing the CVA NW Breechplug.
$
2.99
CVA PARAMOUNT LOADING TUBE 0487
Loading tube for Blackhorn Powder
$
3.99
cva PARAMOUNT BH209 LOADING TUBES 3 pack AC1721
PARAMOUNT BH209 LOADING TUBES
$
14.99
CVA PARAMOUNT WRENCH AC1720
PARAMOUNT WRENCH
$
18.99
CVA 209 Capper/Extractor Tool (single primer) AC1677
Allows for easy capping and removal of #209 shot shells primers. Works on any brand of in-line muzzle loaders.
$
4.99
CVA RAMROD ACCESSORY KIT .50 AC1486B
Ramrod Accessory kit for .50 cal, threaded 10/32
$
20.99
CVA ELR LOADING TIP, .45 & .50 AC1722
ELR LOADING TIP, .45 & .50
$
25.99
CVA VARIFLAME KIT AC1717
VARIFLAME KIT
$
60.99
CVA VARIFLAME ADAPTER SET AC1716
VARIFLAME ADAPTER SET
$
52.99
CVA Wolf ramrod 24 inch 30886
Wolf ramrod 24 inch 30886
$
11.99
CVA FIRING PIN REMOVER & DECAPPER AC1695/32440
FIRING PIN REMOVER & DECAPPER
$
5.99
CVA VARIFLAME CAPPER TOOL AC1724
VARIFLAME CAPPER TOOL
$
10.99
cva universal powder measure ac1509
universal powder measure AC1509 one per card
$
8.99
CVA UNIVERSAL SPEED LOADER POUCH W/LOADER AC1728
Speed pouch installed on buttstock to hold 2 universal speed loaders. 2 universal speed loaders included.
$
19.99
CVA UNIVERSAL SPEED LOADER POUCH ONLY AC1729
Speed pouch installed on buttstock to hold 2 universal speed loaders.
$
17.99
CVA 209 SHOOTER'S NECESSITIES .50 AA1813
Basic set for loading and cleaning.
$
19.99
CVA 3 CRBN STEEL NPPLS - 6 X 1MM AC1481
M6 x 1 Carbon Steel Nipples for CVA breech plugs
$
13.99
cva TOOL FOR QRBP 30447
TOOL FOR QRBP
$
4.99
CVA EXTENDED CLEANING JAG - 50 CAL ac1657A
3" Extended Cleaning Jag for .50 cal, Threaded 10/32
$
9.99
CVA .40 CAL JAG ac1462D
CVA AC1462D CLEANING JAG .40 CAL
Caliber: .40 Model: Cleaning Jag Manufacturer: CVA
$
5.99
CVA CLEANING JAG .45 CALIBER ac1462
CVA CLEANING JAG .45 CALIBER, CVA
Type: RAMRODS ACCESSORIES Material: BRASS Manufacturer: CVA
$
4.99
cva 4inch 50 cal Jag AC1657-4
This is a brand new jag but 4 inch long, Picture may very, These are normally not available except in a kit
$
11.99
cva QRBP VARIFLAME CONVERSION KIT AC1737
- Utilizes large rifle primers for a hotter, more consistent ignition.
- Includes priming tools to load VariFlames.
- Recommended to be used only in the following CVA muzzleloaders;
- Accura LRX, Accura MRX, Accura PR, Accura MR, all Optima models, and all Wolf models.
$
85.99
CVA Adjustable Powder Measure AC1410
Adjustable Powder Measure (Range Model) Adjustable tip to 120 grain brass measure. Convenient funnel swivels to level powder.
$
10.99
CVA ANTI-SEIZE STICK AC1682
No more mess while taking care of a very important step. Stick applicator allows you to apply the Anti-Seize directly on the threads without getting it on your hands
$
7.99
CVA Optima V2 26" ramrod 30884
Optima V2 26" ramrod 30884
$
11.99
CVA BARREL BLASTER PARTS SOAKER AC1686
Use to soak breech plugs and nipples, or any other small heavily fouled parts 4 oz
$
10.99
CVA BARREL BLASTER QUICKCLEAN PTCH AC1687
Cleaning patches that are pre-saturated with Barrel Blaster Solvent for quick easy cleaning of your barrel at the range or at home
$
11.99
CVA BARRELBLASTER PRELUBED PATCHES (100) AC1689
CVA Barrel Blaster Prelubed Patches
$
9.99
CVA BARREL BLASTER SOLVENT - 8OZ. AC1660
Barrel Blaster Solvent 8 oz
$
6.99
CVA BARREL BLASTER 12OZ SPRAY AC1685
Use to wet cleaning patches for swabbing the barrel or with a parts cleaning brush to remove fouling from gun parts
$
12.99
CVA BARREL BLASTER WONDER GEL AC1684
Ammonia-based cleaning gel deeps the cleaner right where you want it for the removal of lead, copper and plastic fouling
$
16.99
CVA BREECH BRUSH SET (INLINES) AC1612
Nylon Brush Set for CVA muzzle loaders
$
3.99
CVA BREECH CLEANERS (50) AC1615
Flexible felt-covered wire cleaners reach hard to get to places
$
5.99
CVA Bullet Puller AC1461
Bullet Puller
$
5.99
CVA Bullet Starter Synthetic AC1431A
Bullet Starter Synthetic
$
4.99
CVA .50 CAL CLEANING BRUSH AC1463A
.50 Cal Brass Cleaning Brush, Threaded 10/32
$
2.99
cva .40 CAL CLEANING BRUSH AC1463D
.40 Cal Brass Cleaning Brush, Threaded 10/32
$
2.99
CVA Cleaning Jag .50 Caliber AC1462A
Brass cleaning jag fits all CVA ramrods
$
5.99
CVA RAMROD EXTENSION 3" 45CAL JAG CVA AC1657
3" 45 cal brass cleaning jag
$
7.99
CVA COTTON SWAB - .50 CAL AC1586
.50 cal Cottom Swab, threaded 10/32
$
3.99
CVA Cotton Swab .54 Caliber AC1587
Cotton Swab .54 Caliber
$
3.99
CVA Cylinder Flask AC1400
CVA Cylinder Flask - 30 Grain Spout (Range Model) End cap unscrews for quick, easy and safe loading. All brass construction. Holds 5 oz. Field model holds 2.5 oz.
$
21.99
CVA SOFT PISTOL CASE 24" MC2047
CVA SOFT PISTOL CASE 24"
$
38.99
CVA PARAMOUNT CASE 51" OD GRN MC2066
Soft case for the CVA Paramount.
$
99.99
CVA PARAMOUNT RAMROD POUCH AC1699-BAG
Soft Pouch for Aluminum Collapsible ramrods
*Does not fit Carbon Fiber Collapsible ramrods*
$
33.99
CVA DOUBLE-ENDED CLEANING BRUSH AC1629
Cleaning Brush for CVA Muzzle loaders
$
3.99
STOCKER I, STRETCH BAND, FDE 91003-9
Holds a total of six cartridges.
Fits .223 Rem up to .338 Win. Mag.
Always have your ammunition, muzzleloading supplies, and smaller field accessories on hand with our gunstock ammunition pouches. The Stocker I pouch is our more stream-lined pouch, holding six cartridges and attaching to the gunstock with the supplied Velcro pads. Three pads are included to make it easier when switching the pouch from one gun to another.
$
35.99
CVA Extendible Replacement Ramrod 30603
Extendible Replacement Ramrod (for 24" barrel length) .50 Caliber Aluminum replacement rod with screw-out extension
$
16.99
CVA Fiberglass Ramrod .50 Caliber AC1473
Flexibility to bend without breaking. 3' length for you to custom fit. 11/32" dia. 10-32 thread.
$
26.99
CVA Fiberglass Ramrod Universal Caliber AC1470
Flexibility to bend without breaking. 3' length for you to custom fit. 11/32" dia. 10-32 thread.
$
14.99
OPTIMA PISTOL PALM SAVER ROD 30937
OPTIMA PISTOL PALM SAVER ROD 30937
$
9.99
CVA Hex head Breech Plug Wrench AC1616
Made from solid steel. Assists in complete take down of CVA in-line rifles. This wrench is for the Accura, Optima, Optima Pro, Optima Elite, Wolf, Kodiak, & Kodiak Pro.
$
10.99
CVA Hunter Nipple Wrench - Universal AC1602
Four-position, stainless steel wrench functions in tight quarters. Perfect for scoped rifles.
$
10.99
CVA Hunter Powder Measure AC1413
Hunter Powder Measure - Adjustable from 60-130 Grains
$
8.99
CVA UNIVERSAL NIPPLE PICK AC1582
Universal Nipple pick for cleaning Breech plug flash holes
$
8.99
CVA Lifetime Range Rod AC1633
Lifetime Range Rod-Use this rod for loading at the range and cleaning after any shooting
$
40.99
CVA Magnum Speed Loader for Blackpowder Pellets AC1617A
Magnum Speed Loader for Blackpowder Pellets .50 cal. (3)This loader will handle a magnum load plus any bullet. Package of 3.
$
6.99
CVA PALM SAVER KNOB 30883E
Palm saver knob that fits on the threaded palm saver ramrod.
$
8.99
CVA Palmsaver Ramrod for 24″ CVA Muzzleloader AC1703
Fits 2010 and newer Wolf Package includes: Ramrod for a 24″ barrel Extended jag for cleaning Palm saver
$
35.99
CVA Palmsaver replacement ramrod AC1711
Palmsaver replacement ramrod for 24 inch barrel length on Traditons break action muzzleloaders ONLY FOR Traditons break action muzzleloaders. The PalmSaver Ramrod consists of a solid aluminum rod with a special jag on one end that is threaded. The actual PalmSaver, or knob, attaches to this threaded jag and is configured in a way that allows it to be left on the gun while firing. For the shooter, the rod can be removed quickly for loading a second shot, and, most importantly, the PalmSaver knob protects the palm while he seats the next bullet. The rod also comes with a 4 inch jag extension which, when attached to the opposite end, converts the ramrod into a full length range rod.
$
35.99
CVA Palmsaver Ramrod for 25″ CVA Muzzleloader AC1702
Ramrod fits Accura MR Package includes: Ramrod for a 25″ barrel Extended jag for cleaning Palm saver
$
35.99
CVA Palmsaver Ramrod for 26″ CVA Muzzleloader AC1701
its 2010 and newer Optima V2 Package includes: Ramrod for a 26″ bbl Extended jag for cleaning Palm saver
$
35.99
CVA Palmsaver replacement ramrod AC1708
Palmsaver replacement ramrod for 26 inch barrel length on Thompson Center break action muzzleloaders ONLY FOR Thompson Center Break action muzzleloaders. The PalmSaver Ramrod consists of a solid aluminum rod with a special jag on one end that is threaded. The actual PalmSaver, or knob, attaches to this threaded jag and is configured in a way that allows it to be left on the gun while firing. For the shooter, the rod can be removed quickly for loading a second shot, and, most importantly, the PalmSaver knob protects the palm while he seats the next bullet. The rod also comes with a 4 inch jag extension which, when attached to the opposite end, converts the ramrod into a full length range rod.
$
35.99
CVA Palmsaver replacement ramrod AC1710
Palmsaver replacement ramrod for 26 inch barrel length on Traditons break action muzzleloaders The PalmSaver Ramrod consists of a solid aluminum rod with a special jag on one end that is threaded. The actual PalmSaver, or knob, attaches to this threaded jag and is configured in a way that allows it to be left on the gun while firing. For the shooter, the rod can be removed quickly for loading a second shot, and, most importantly, the PalmSaver knob protects the palm while he seats the next bullet. The rod also comes with a 4 inch jag extension which, when attached to the opposite end, converts the ramrod into a full length range rod.
$
35.99
CVA Palmsaver Ramrod for 27″ CVA Muzzleloader ac1700
Fits 2010 and newer Accura V2. Package includes: Ramrod for a 27″ barrel Extended jag for cleaning Palm saver
$
35.99
CVA PALMSAVER ROD CVA 30" .50 CAL AC1712
PALMSAVER ROD CVA 30" .50 CAL Accura V2 LR
30"
$
35.99
CVA PALMSAVER ROD TC 28" .50 CAL. AC1707
Palmsaver Ram Rod for 28" TC .50 Cal
$
35.99
CVA Palmsaver replacement ramrod AC1709
Palmsaver replacement ramrod for 28inch barrel length on Traditons break action muzzleloaders The PalmSaver Ramrod consists of a solid aluminum rod with a special jag on one end that is threaded. The actual PalmSaver, or knob, attaches to this threaded jag and is configured in a way that allows it to be left on the gun while firing. For the shooter, the rod can be removed quickly for loading a second shot, and, most importantly, the PalmSaver knob protects the palm while he seats the next bullet. The rod also comes with a 4 inch jag extension which, when attached to the opposite end, converts the ramrod into a full length range rod.
$
35.99
CVA Palmsaver Ramrod for 28″ CVA Muzzleloader AC1704
Fits 2010 and newer Apex and Accura PR Package includes: Ramrod for a 28″ barrel Extended jag for cleaning Palm saver
$
35.99
CVA RAMROD - 22" FOR 25" CVA 30901 (These are the newer ones)
RAMROD - 22" FOR 25" CVA, RAMROD - 22" FOR 25" CVA, these ramrods are the new version cva is starting to sell with guns and separately it has the part to screw in the plastic palm saver and a hole in the center for a jag, but it has no threads on the other end its just made for bullet seating
$
11.99
CVA RAMROD - 22" FOR 25" CVA 30901 (These are the newer ones)
RAMROD - 22" FOR 25" CVA, RAMROD - 22" FOR 25" CVA, these ramrods are the new version cva is starting to sell with guns and separately it has the part to screw in the plastic palm saver and a hole in the center for a jag, but it has no threads on the other end its just made for bullet seating
$
11.99
CVA RAMROD FOR ACCURA LR RIFLE 32308
RAMROD FOR ACCURA LR RIFLE
$
16.99
CVA Accura V2 27" ramrod 30888
Accura V2 27" ramrod 30888
$
11.99
CVA Accura PR 28" ramrod 32579
Accura PR28"32579
$
11.99
CVA Patch Puller - Universal Caliber AC1460
Patch Puller - Universal Caliber
$
5.99
CVA POWDER FUNNEL TOP(FOR PYDX CN AC1385
Powder Funnel Top
$
6.99
CVA® Anti-Static Loose Powder Field Funnel - AC1746
00% anti-static powder funnel
Designed for loading loose powder
$
10.99
CVA Powder Horn AC1451A
Powder Horn
$
26.99
CVA RAMROD ACCESSORY PK .45 CALAC1466A
Ramrod Accessory kit for .45 cal, threaded 10/32
$
7.99
CVA RAMROD ACCESS.PACK .50 CAL AC1466B
Ramrod Accessory kit for .50 cal, threaded 10/32
$
7.99
CVA MAGNUM SPEED LOADER .45 (3) AC1617
This loader will handle a magnum load plus any bullet. Package of 3.
$
6.99
CVA Rapid Loader - .45 Caliber AC1556
Straight through tube allows for loading ball, patch and powder in one fluid motion. Package of 3.
$
6.99
CVA Rapid Loader - .50 Caliber AC1556A
Straight through tube allows for loading ball, patch and powder in one fluid motion. Package of 3.
$
6.99
CVA Rapid Loader - .54 Caliber AC1556B
Straight through tube allows for loading ball, patch and powder in one fluid motion. Package of 3.
$
6.99
CVA BREECHPLUG/NIPPLE GREASE - 2OZ AC1670
Breechplug and Nipple Grease 2oz, High Temp.
$
4.99
CVA BARREL BLASTER SOLVENT - 4OZ. AC1437
CVA Barrel Blaster Solvent 4 oz
$
6.99
CVA Straight line Capper (Range Model) AC1407
Straight line Capper (Range Model) Holds 15 #11 caps.
$
8.99
CVA T-Bullet Starter w/ Ramrod Extension AC1508
T-Bullet Starter w/ Ramrod Extension Combo bullet starter and ramrod extension that is a must for field loading and cleaning.
$
15.99
CVA RIFLE PISTOL WRENCH AC1488
Rifle/Pistol Nipple Wrench (Side Lock Only). Also includes a nipple pick.
$
6.99
CVA Titan Flask AC1386
Made of space-age polymer that's lightweight and quiet. Top unscrews with 20 gr. Spout, holds 5 oz.
$
5.99
CVA Trophy Powder Measure AC1609
Large brass funnel swivels over measure to help prevent powder spills. Measures 60-130 gr.
$
14.99
CVA Trophy Ramrod Universal Caliber 32 AC1531
5 times stronger. Non-abrasive ramrods not affected by water, oils, alcohols, salts or most acids.
$
13.99
CVA Universal Hollow/Polymer Point Bullet Starter AC1435
Universal Hollow/Polymer Point Bullet Starter w/attachments Comes with separate attachments to fit most hollow points. Allows starting without deformtation.
$
17.99
CVA Universal Loading Tip for Ramrods AC1693
Universal Loading Tip for Ramrods
$
2.99
CVA PowerBelt SpeedClip Loading System AC1501
PowerBelt SpeedClip Loading System Designed for super fast access when reloading in the field, the PowerBelt SpeedClip holds three loaders, each with a PowerBelt Bullet and magnum pellet charge - plus four 209 primers. Plus, it easily attaches to your gun sling, your belt or a lanyard for quick access.
$
8.99
CVA PowerBelt Bullet Starter - Universal. 9 Attachments AC1500
PowerBelt Bullet Starter - Universal. 9 Attachments The PowerBelt Bullet Starter is a must for shooters who are interested in maximizing accuracy with any hollow or polymer point bullet - including PowerBelt Bullets.
Here's why. Any deformation of the bullet tip during the loading process will destroy the aerodynamic integrity of the bullet. Since the damage is done after the projectile is in the barrel, many shooters never figure out why their hollow or polymer points are producing inconsistent groups. But think about it. Many tight fitting projectiles, especially sabots, must be virtually hammered down the bore - damaging the bullet tip.
The PowerBelt Bullet Starter solves this problem with loading tips that engage the bullet at either the base of the hollow point cavity or around the polymer point, not the nose of the bullet. Tight fitting projectiles can be loaded without any damage to the bullet ensuring that the perfect bullet you start down the barrel stays that way until it hits the target.
The PowerBelt Bullet Starter comes with two sets of three loading tips to fit almost all hollow point bullet designs and one set of 3 tips for polymer point bullets. One tip goes on the short rod of the starter, one on the long rod, and one on the ramrod.
Here's why. Any deformation of the bullet tip during the loading process will destroy the aerodynamic integrity of the bullet. Since the damage is done after the projectile is in the barrel, many shooters never figure out why their hollow or polymer points are producing inconsistent groups. But think about it. Many tight fitting projectiles, especially sabots, must be virtually hammered down the bore - damaging the bullet tip.
The PowerBelt Bullet Starter solves this problem with loading tips that engage the bullet at either the base of the hollow point cavity or around the polymer point, not the nose of the bullet. Tight fitting projectiles can be loaded without any damage to the bullet ensuring that the perfect bullet you start down the barrel stays that way until it hits the target.
The PowerBelt Bullet Starter comes with two sets of three loading tips to fit almost all hollow point bullet designs and one set of 3 tips for polymer point bullets. One tip goes on the short rod of the starter, one on the long rod, and one on the ramrod.
$
18.99
CVA MUZZLELOADING ACCESSORY KIT 50 AA1720
.50 Cal Essentials Accessory Outfit
$
51.99
CVA Knucklesaver Bullet Starter AC1428
This New Design starts the bullet but stops your knuckles short of the muzzle.
$
27.99
CVA PELLET SHOOTERS ACCY SET .50 AA1716
.50 Cal Muzzle loading Accessory Outfit
$
74.99
CVA SOFT BAG FIELD CLEANING KIT AA1722
Soft Bag Field Cleaning Kit
$
52.99
CVA QRBP CLEANING SYSTEM AC1631
QRBP Cleaning tools
$
29.99
CVA SEE-THRU POWDER MEASURE AC1411
SEE-THRU POWDER MEASURE
$
22.99
CVA PALM SAVER AC1498
Simple, inexpensive accessory for easier, more comfortable loading and cleaning of your muzzleloader
$
3.99
CVA BBL BLASTER FOAMING BORE CLEANER 7oz AC1688
Absolutely the easiest way to clean your muzzleloader! Spray the foam into the barrel and allow to sit for one hour, then swab foam out of the barrel and you are done!
$
16.99
CVA BRUSH/SWAB SET - .50 CAL. AC1464B
Ramrod Brush and Swab for .50 cal, threaded 10/32
$
4.99
CVA VARIFLAME MAGNETIC CAPPER TOOL AC1723
VARIFLAME MAGNETIC CAPPER TOOL
$
21.99
cva POWDER POD STORAGE AC1744
A weather resistant primer storage system that holds 20 VariFlames or 209 primers, and is small enough to be taken into the field.
$
10.99
cva POWDER POD & PRIMER STORAGE AC1743
- A 2-in-1 weather resistant storage system to have blackpowder and primers at the ready, whether in the field or at the shooting range.
- The powder storage compartment holds plenty of loose blackpowder for multiple shots or reloads, and is produced from a medical grade antistatic polymer.
- The primer storage compartment holds 20 VariFlames or 209 primers. Plus, is removable from the powder storage, which can be taken into the field.
$
25.99
CVA UNI POWDER MEASUURER 50-170 AC1742
- Measures blackpowder charges from 50 grains to 170 grains by volume
- Produced from a medical grade antistatic polymer
$
14.99
