If you are looking for a special magazine and its not listed here, please send us a e mail or call us and we will see if we can get it for you
pro mag high point 995/995ts carbine mag 15 round hip-a3
pro mag high point 995/995ts carbine 15 round mag
$
28.99
remington 22 magazine used 017
remington 22 magazine used 017
$
13.99
RG 25 cal phenix arms magazine Used 010
RG 25 caliber used magazine, Made by phenix arms
$
25.99
Glock 27 (used) 9 round mag 015
Nice used mag for a GLOCK 9 round capacity
$
21.97
P229 Sig 12 round (used) 014
used 12 round sig p229 40 cal 357
$
25.99
Smith & Wesson 12 round mag used
Smith & Wesson 12 round mag used from a 99L LEO
$
13.99
mossburg mc1sc magazine 6 rounds #207
mossburg mc1sc magazine 6 rounds used
$
9.99
magazine for a mossburg mc1sc #206
magazine for a mossburg mc1sc 7 rounds used
$
9.99
mossberg 9mm mc1sc magazine 6 rounds #95415
mossberg mc1genuine mag 6 rounds used in package
$
10.99
AR-15 MA-Loader 100-036-245WB
A California-Compliant Mag Loader Designed for Fast Reloads
California, among other restrictive states, passed a series of laws designed to restrict the ability of law-abiding gun owners to effectively reload their AR-style sporting rifles. This not only tramples on the rights of law-abiding citizens, it also prevents innocent civilians from reloading their guns quickly in the face of an attacker, possibly costing lives. To combat this, Mean Arms developed its MA-Loader, the first-ever loading device designed to reload AR-style .308s and AR-15s from the ejection port.
The Mean Arms MA-Loader doesn't require any modifications to a standard AR-15 or AR-style .308 rifle to function. The company offers an MA Feed Ramp designed to streamline the loading process, but it is not required to use the loader. These mag loaders will load 10 rounds of 7.62 NATO or 5.56 NATO quickly and easily, allowing honest gun owners to get their rifles back into action quickly and easily.
A Mean Arms MA-Loader designed for use in the AR-15 will function in any mil-spec AR-15 rifle. The MA-Loader designed for use with AR-style .308 rifles functions with most short-action AR designs on the market, including the DPMS LR-308 and the GII.
$
39.99
Magblock Ruger pc Carbine 10/17
Brand new mag reducer for a ruger PC Carbine 10/17 (U-12 hole
$
6.99
Glock 23 Magblock 10/13 (.40) for Older Style Follower 024
Glock 23 (9mm) Magblock (For Older Style Followers Only)
- Fits 13 round .40 Foctory Glock 23 magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .40.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
* Please click the photos for installation instructions. Fits older style follower Glock Magazines only.
Only compatable with the follower type shown in the pictures.
$
6.25
Glock 22, 24 and 35 Magblock 10/15 (.40) 023
Glock 22 (.40) Magblock
- Fits 15 round .40 caliber Glock 22, Glock 24 and Glock 35 magazines. *See details on correct follower types below.
-Will also fit Korean Glock Magazines.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of .40 caliber ammunition.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
* Please click the photos for installation instructions. Fits newer generation full metal lined Glock Magazines.
Only compatable with the follower type shown in the pictures.
* Will work in Glock 31 357Sig and convert a 15 round magazine to 10 rounds.
$
6.25
Mini 30 Ruger Magblock 10 Round Limiter 022
Ruger Mini 30 Magblock 10/20 Magazine Capacity Limiter
This block is for use in RUGER 20 round factory Mini 30 magazines. These blocks will insert at the base of the magazine spring and convert a 20 round magazine to hold only 10 rounds.
- Only for use in RUGER manufactured magazines.
10 Round Limiter for 20 round mag (10/20)
$
6.25
Magblock Universal Pistol Limiter Kit 021
Magblock Universal Pistol Limiter kit allows for an easy custom solution for most standard pistol magazines. Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.
Save time and money by making your magazines legal.
NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut. Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes. If they don't work out for you just send them back for a refund or exchange.
- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.
- Comes with one universal base, an adjustable slide, and a bottom lock plate which is optional to use. Highly recommend using optional Magblock Cement below.
- Easily installs at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- Patented adjustment mechanism and end profile that prevents the limiter from sliding off the follower.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Requires cutting of the Magblock for a custom fit. As shipped it will limit most magazines to much less than 10 rounds.
$
6.99
MAGBLOCK UNIVERSAL PISTOL LIMITER KIT (3 PACK)
Quick Overview:
MAGBLOCK UNIVERSAL PISTOL LIMITER 3 PACK KIT
ALLOWS FOR AN EASY CUSTOM SOLUTION FOR MOST STANDARD PISTOL MAGAZINES. REQUIRES CUTTING OF THE MAGBLOCK FOR A CUSTOM FIT. AS SHIPPED IT WILL LIMIT MOST MAGAZINES TO MUCH LESS THAN 10 ROUNDS.
Save time and money by making your magazines legal.
NOTE: These are recommended for gunsmiths and hobbyists who don't mind experimenting with the length to get the fit they want. We do offer these as an option for some magazines already precut. Now you have an option if we do not have a limiter available for your specific magazine with the recent law changes.
- This Magblock fits most magazines from .380, 9mm, .40, 10mm and .45 magazines.
$
19.99
Sig Sauer P226 (.40) Magblock 10/13 026
Magblock 10 Round Limiter for Sig P226 (.40) 13 Round Magazines
- Fits 13 round .40 Sig P226 magazines made by Mec-Gar.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.
*Universal Limiter can be used to make this block. Cut the base flush with #8 showing in the indicator notch.
$
6.25
Sig Sauer P226 (.40) 10/12 Magblock 027
Magblock 10 Round Limiter for Sig P226 ,12 Round .40 Magazines.
- Fits the new 12 round .40 Factory Sig P226 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.
- Uses the Universal Limiter cut with #6 in the indicator notch with a flush base.
$
6.25
Sig Sauer P224 (9mm) 10/12 Magblock 025
Magblock 10 Round Limiter for Sig P229 and P226 12 Round .40 Magazines.
- Fits the new 12 round .40 Factory Sig P229 and P226 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of .40
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.
$
6.25
Smith & Wesson M&P SHIELD PLUS Magblock 10/13 (9mm) 020
Smith & Wesson M&P Shield Plus 9mm Sub-Compact Magblock 10 Round Limiter
- Fits 13 round 9mm M&P Shield Plus magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$
6.25
Smith & Wesson M&P SHIELD PLUS Magblock 10/13 (9mm) 020
Smith & Wesson M&P Shield Plus 9mm Sub-Compact Magblock 10 Round Limiter
- Fits 13 round 9mm M&P Shield Plus magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$
6.25
S&W M&P 2.0 FULL SIZE 9MM 10/15 MAGBLOCK
SMITH & WESSON M&P FULL SIZE 9MM MAGBLOCK 10 ROUND LIMITERS
- Fits 15 round 9mm M&P full size magazines. (Identified by extra spring coils at the base)
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W 15 Round Magazines.
*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.
*Universal Pistol Limiter Instructions: Cut to #14 and glue flush at the bottom for 10/15 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #14 will show in the limiter window notch like in the photos.
$
6.99
SMITH & WESSON M&P & 2.0 9MM 10/17 MAGBLOCK (10 & 15 ROUND LIMITERS)
Fits 17 round 9mm M&P magazines.
- Will also fit 2.0 models
- Also reported to work with full frame magazines limited to 15 rounds that have extra spring coils at the base of the magazine. (see photos)
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W Magazines.
*Please click on photos at left for installation instructions. New design installs at the base of the spring and sits on top of the original locking plate.
*Universal Pistol Limiter Instructions: Cut to #14 and glue flush at the bottom for 10/17 limiter. Slide lock is not used. When epoxy cures assemble magazine. The two parts of the universal limiter must be glued flush to prevent the locking plate from causing the limiter to shift sideways. #14 will show in the limiter window notch like in the photos.
*Note: This block will work in the new M&P 2.0 Metal Series Pistols that come with 17rd magazines.
$
6.99
M&P SHIELD PLUS & EQUALIZER 10/15 MAGBLOCK (9MM)
Fits 15 round 9mm M&P Equalizer/Shield Plus magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$
6.99
S&W M&P SHIELD PLUS, EQUALIZER 10/13 Magblock (9mm)
Fits 13 round 9mm M&P Shield Plus magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$
6.99
FN FIVE-SEVEN MK3 10/20 MAGBLOCK (5.7X28)
Fits 20 round 5.7 mm Factory FN magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 5.7 mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$
6.99
SMITH & WESSON M&P FPC, 2.0 MAGBLOCK 10/23 (9MM) "New" S&W M&P FPC, 2.0_10_23
Fits 23 round 9mm M&P FPC (Folding Pistol Caliber Carbine) magazines.
- Will also fit 2.0 models
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W Magazines.
$
6.99
SMITH & WESSON M&P FULL SIZE 9MM MAGBLOCK 10 ROUND LIMITERS SW_M&P_1017
- Fits 17 round 9mm M&P magazines.
- Will also fit 2.0 models
- Also reported to work with full frame magazines limited to 15 rounds that have extra spring coils at the base of the magazine. (see photos)
- New design installs at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design. - Tested with factory S&W Magazines.
$
6.99
GLOCK ETS 20 (10 MM) MAGBLOCK
Fits 15 round 10 mm ETS Glock 20 magazines. *See details on correct follower types below.
- Easy installation under the magazine follower.
- Limits the magazine to 10 rounds of 10mm ammunition.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$
6.99
BROWNING BAR MK 3 DBM 5/10 MAGBLOCK (HUNTING)
FITS BROWNING BAR MK3 .308 10 ROUND MAGAZINES.
- Easiest and quickest way to make a 5 round Browning BAR Magazine perfect for hunting.
- No magazine modifications required.
-New light weight design.
$
9.99
SIG SAUER P229-1 (E2) MAGBLOCK 10/15 (9MM)
MAGBLOCK 10 ROUND LIMITER FOR SIG 15 ROUND P229-1 MAGAZINES.
FITS THE SIG P228 M11-A1
- Fits the new 15 round 9mm Factory Sig P229-1 magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.
$
6.99
Sig Sauer P226 Magblock 10/15 (9mm) (short follower)
This Magblock fits the Sig P226 15 round magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- Simple install to make 10/15 Sig Sauer P226 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Tested on factory Sig P226 magazines as shown in the photos. The block may need to be modified to work with magazines from other manufactures.
*This magazine is known to use two different types of followers depending on where they were manufactured. Please select the country of manufacture or your follower length below. The most accurate way is to measure your follower as shown in the photos.
Select your follower length or country of manufacture short follower (1 inch tall follower uses taller #11.5 block used in made in USA magazines
$
6.99
SIG SAUER P226 MAGBLOCK 10/15 (9MM) (long follower)
This Magblock fits the Sig P226 15 round magazines and will limit them to 10 rounds. Easily installed in seconds at the base of the spring. It is held in place with spring tension alone or can be epoxied if desired.
- Simple install to make 10/15 Sig Sauer P226 magazines.
- No modification to the magazine is required.
- Lightweight and will not interfere with magazine reliability.
- Tested on factory Sig P226 magazines as shown in the photos. The block may need to be modified to work with magazines from other manufactures.
*This magazine is known to use two different types of followers depending on where they were manufactured. Please select the country of manufacture or your follower length below. The most accurate way is to measure your follower as shown in the photos.
The follower length or country manufacture long follower (1.25 tall follower uses short #8 block - used in mec-gar or made in Italy magazines.
$
6.99
magblock ak 47 io, uak-38 10/30
Magblock for IO Inc. or Inter Ordnance AK47 (7.62x39mm) Magazines.
- This block fits the 30 round AK47 magazines in 7.62x39mm made by IO and will convert them to a 10 round magazine.
- Replaces the lower locking plate for an easy and secure install.
$
7.99
Smith & Wesson M&P Subcompact 2.0 Magblock 10/12 (9mm)
Fits 12 round 9mm M&P and M&P 2.0 Subcompact magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9 mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$
6.99
Mag block fast setting epoxy
Mag block fast setting epoxy
$
6.99
Canik TP9SF Elite, Mete MC9 Compact Magblock 10/15 (9mm)
Magblock 10 Round Limiter for Canik TP9SF Elite and METE MC9 Compact 15 Round Magazines
- Fits 15 round 9mm Factory Canik TP9 Compact magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.
-Tested on factory Canik TP9 Compact magazines.The block may need to be modified to work with magazines from other manufactures.
$
6.99
Canik TP9 Elite SC, Mete MC9 Magblock 10/12 (9mm)
Magblock 10 Round Limiter for Canik TP9 Elite Sub-Comp 12 Round Magazines
- Fits 12 round 9mm Factory Canik TP9 Elite and Mete MC9 Subcompact magazines.
- Easy installation at the base of the spring.
- Limits the magazine to 10 rounds of 9mm.
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
- Made of a super strong, heat resistant, fiber reinforced polymer.
-Tested on factory Canik TP9 Subcompact 12 round magazine.The block may need to be modified to work with magazines from other manufactures.
$
6.99
Rock Island M1911 XT-22 Magnum Magblock 10/14 (.22WMR)
Armscor/RIA XT-22 Magnum (.22WMR) Magblock 10 Round Limiter for 14 Round Magazine.
- Fits 14 round Armscor/Rock Island Armory XT-22 magnum magazines.
- Easy installation by replacing the locking plate. See photos.
- Limits the magazine to 10 rounds of .22magnum
- Held in place with spring tension or can be epoxied for a permanent modification.
- Lightweight, efficient design.
$
6.95
MagLULA Ruger Factory 10/22 BX .22LR LULA Mag Loader & Unloader Set Black lu30b
Finally a magazine loader for Ruger’s factory 10/22 .22LR magazine that actually works. Fits :
- Ruger’s factory mags: BX-1, 5, 10 rotary, and BX-15 and BX-25.
- S&W T/CR22 10rd mag. - (tighter fit)
- Never jams
- Will not dent delicate .22LR cases
- Will not loose the bullet from its crimp
- Never leaves a trace on the tip of the bullet
- Painless and quick loading
- Pocket-size
$
39.99
Maglula UpLULA Universal Pistol Mag Loader/Unloader 9mm TO .45 cal - Purple up60pr
The Maglula UpLULA is a military-grade, pocket-size, universal pistol magazine loader and unloader designed to load and unload virtually all* 9mm Luger up to .45ACP single and double stack magazines of all manufacturers. It also loads most .380ACP single and double-stack mags, and 1911’s mags. The UpLULA loader self-adjusts to the magazine and loads it easily, painlessly, and reliably.
- Loads all* 9mm Luger, .357 Sig, 10mm, .40, and .45ACP cal. single and double stack magazines., including 1911 mags, of all manufacturer, and also loads most .380ACP single and double-stack mags.
- Pocket-size. One size fits all. No inserts, spacers or adjustments at all.
- Easy loading; the rounds just drop in with no thumb pushing or pressing.
- No more pain ! Load hundreds of rounds painlessly.
- Protects your fingers and mags.
- Up to one round per sec. loading rate. 1/3 the time loading several mags with thumb.
- Fits in hand and pocket, weighs only 66 grams (2.3 Ounce).
- Highly durable.
*The UpLULA does NOT load the following :
- S&W 7rd 9mm SS for models 908,3913,3913,3953 & 3954 (Beak too wide, does not enter between lips). It will load the S&W Shield magazine
- Glock G36 6rd .45 SS (Single Stack) (Beak will not retract from the mag.)
- Glock G37, G38, G39 .45 G.A.P. mags (Beak will not retract from the mag.)
- Kel Tec PMR-30 mags.
- Luger P08 (Parabellum) 9mm (round angle in mag too steep)
- Rounds longer than 33mm, like: 9×23 Win, .38 Special, .357 Magnum, .357 Max., .41/.44 Rem. Mag., .44 S&W Special, .45 Colt, .45 Win Mag., .50AE.
- May not load the last round in few types of mags.
- Mags with less than 8.0mm between their lips.
$
38.99
Maglula 9mm to .45ACP universal UpLULA magazine loader – US Flag up60us
Maglula 9mm to .45ACP universal UpLULA magazine loader – US Flag
$
38.99
MagLULA UpLULA - Universal Pistol Mag Loader 9mm thru .45 ACP Black up60b
The Maglula UpLULA is a military-grade, pocket-size, universal pistol magazine loader and unloader designed to load and unload virtually all* 9mm Luger up to .45ACP single and double stack magazines of all manufacturers. It also loads most .380ACP single and double-stack mags, and 1911’s mags. The UpLULA loader self-adjusts to the magazine and loads it easily, painlessly, and reliably.
- Loads all* 9mm Luger, .357 Sig, 10mm, .40, and .45ACP cal. single and double stack magazines., including 1911 mags, of all manufacturer, and also loads most .380ACP single and double-stack mags.
- Pocket-size. One size fits all. No inserts, spacers or adjustments at all.
- Easy loading; the rounds just drop in with no thumb pushing or pressing.
- No more pain ! Load hundreds of rounds painlessly.
- Protects your fingers and mags.
- Up to one round per sec. loading rate. 1/3 the time loading several mags with thumb.
- Fits in hand and pocket, weighs only 66 grams (2.3 Ounce).
- Highly durable.
*The UpLULA does NOT load the following :
- S&W 7rd 9mm SS for models 908,3913,3913,3953 & 3954 (Beak too wide, does not enter between lips). It will load the S&W Shield magazine
- Glock G36 6rd .45 SS (Single Stack) (Beak will not retract from the mag.)
- Glock G37, G38, G39 .45 G.A.P. mags (Beak will not retract from the mag.)
- Kel Tec PMR-30 mags.
- Luger P08 (Parabellum) 9mm (round angle in mag too steep)
- Rounds longer than 33mm, like: 9×23 Win, .38 Special, .357 Magnum, .357 Max., .41/.44 Rem. Mag., .44 S&W Special, .45 Colt, .45 Win Mag., .50AE.
- May not load the last round in few types of mags.
- Mags with less than 8.0mm between their lips.
$
38.99
