FIRING PIN KIT FIRE.KIT

Firing pin kit for CVA Break action muzzleloaders made in 2010 or later. Will not work in the Apex.

12.99

209 Hex Head Shotgun Primer Replacement Breech Plug AC1678A

Replacement breech plugs are the same reliable designs and quality that come standard with all CVA rifles.

This Breech plug is only for Pivot-Action and Break-Actions made in *2009 and before, these models would include-

Optima-Optima Pro-Wolf-Kodiak-Kodiak Pro

The last to numbers of your serial number indicate the year your model was made-

Example 61-13-??????-01 this model was made in 2001

17.99

Notched Firing Pin 29961

Notched Firing Pin 29961 for older guns

5.99

209 In-Line Shotgun Primer Replacement Breech Plug AC1678

Replacement breech plugs are the same reliable designs and quality that come standard with all CVA rifles.

This Breech plug is for most all Conventional In-Lines & Bolt-Action Muzzleloaders

This includes the following models-

Buckhorn-Eclipse-Eclipse Hunter-Stag Horn-Magbolt 150-Firebolt- Firebolt Ultramag-Hunterbolt-Magnum Hunter

17.99

#11 and Musket Replacement Breech Plug AC1679

Replacement breech plugs are the same reliable designs and quality that come standard with all CVA rifles.

This Breech plug is for most all Conventional In-Lines & Bolt-Action Muzzleloaders This includes the following models- Buckhorn-Eclipse-Eclipse Hunter-Stag Horn-Magbolt 150-Firebolt- Firebolt Ultramag-Hunterbolt-Magnum Hunter Replacement breech plugs are the same reliable designs and quality that come standard with all CVA rifles.

This Breech plug is for most all Conventional In-Lines & Bolt-Action Muzzleloaders This includes the following models- Buckhorn-Eclipse-Eclipse Hunter-Stag Horn-Magbolt 150-Firebolt- Firebolt Ultramag-Hunterbolt-Magnum Hunter

16.95

Replacement QRBP AC1610

The Replacement QRBP is short for Quick Removable Breech Plug, this breech plug will only work on a Apex Barrel after it has been fitted to the barrel.

This can easily be done with the QRBP fitting tool, that comes with the QRBP as well as simple step by step instructions. Each QRBP that comes equipped on 2010 CVA Apex is fitted to that particular barrel that it came with. This is why it is so easy to install and remove.

Once the QRBP is properly installed no tools are required for installing or removing QRBP.

This QRBP will NOT work in the CVA Wolf,Optima, Accura V2 Muzzleloaders

or any other muzzleloader that was not originally set up for QRBP. If it is attempted CVA is not responsible for any damage that can or will happen.

21.99

BLACK BLACKHORN QRBP FOR ACCUR AC1651BH

BLACK BLACKHORN QRBP FOR ACCURA

36.00

BLACK QRBP FOR ACCURA V2, OPTIMA AC1651

BLACK QRBP FOR ACCURA V2, OPTIMA

29.00

O Ring for Firing pin retainer-bushing 29262

29262 O Ring for Firing pin retainer-bushing for Break –Action Muzzleloaders made in 2010 and newer

This item will work in all Optima- Wolf- Accura series muzzleloaders made in and after 2010.

Using a properly fitting screwdriver remove the firing pin bushing from the front of the breech face. The firing pin and spring will drop out.

1.50

Firing pin for Break 29880

29880 Firing pin for Break –Action Muzzleloaders made in 2010 and newer

This item will work in all Optima- Wolf- Accura series muzzleloaders made in and after 2010.

Using a properly fitting screwdriver remove the firing pin bushing from the front of the breech face. The firing pin and spring will drop out.

4.99

Firing pin retainer-bushing 29881

29881 Firing pin retainer-bushing for Break –Action Muzzleloaders made in 2010 and newer

This item will work in all Optima- Wolf- Accura series muzzleloaders made in and after 2010.

Using a properly fitting screwdriver remove the firing pin bushing from the front of the breech face. The firing pin and spring will drop out. Clean these parts and the firing pin recess thoroughly, lube and reinstall. Cotton swabs are good to use here as well. A light coating of breech plug grease on the bushing threads is a good idea.

5.99

Firing pin spring 29882

29882 Firing pin spring for Break –Action Muzzleloaders made in 2010 and newer

This item will work in all Optima- Wolf- Accura series muzzleloaders made in and after 2010.

Using a properly fitting screwdriver remove the firing pin bushing from the front of the breech face. The firing pin and spring will drop out.

1.50

NW BP PIN RETAINER w/O-RING 32190

Northwest Firing Pin retainer with O-Ring

7.49

NW BREECHPLUG PIN 32171

Firing pin to shoot musket caps on break action CVA Northwest muzzleloaders

4.99

NW BREECHPLUG PIN RETAINER no O ring 32170

Firing pin bushing for breakaction CVA Northwest muzzleloaders to be able to shoot musket caps. NO oring

5.99

NW BREECHPLUG SPRING 32172

Firing pin spring for break action CVA northwest muzzleloaders to be able to shoot musket caps.

1.50

Apex Forend Attaching Screw 31910

31910 Front stock screw for the CVA Apex-Scout-Hunter

1.95

Torsion hammer spring 29237

5.95

Breech Plug/Nipple Wrench AC1603

Made from solid steel. Assists in complete take down of CVA in-line rifles

12.99

Cocking Handle Eclips 2000 28318 (used)

These have some scratches on them and are being sold as used .Cocking Handle for eclips , found some more available, Get them while they are available.

6.99

CRUSHZONE RECOIL PAD 30882

These are the newer ones coming out and a bit more harder then the other ones. The Crush-Zone Recoil Pad is made of space age material to absorb recoil impact and minimize shoulder soreness. Fits most CVA Rifles.

10.99

Front Sight Optima Pistol 30700

For use on Optima pistol, and standard rifle when you can't adjust your groups low enough. no screw included with this

8.99

Spring 29824

Tension spring

4.99

Electra Breech Plug 30115

Electra Breech Plug

18.99

Elkhorn Pro Breech Plug for 209 primers 29016

Elkhorn Pro Breech Plug for 209 primers

9.99

Forend Screw for Break-Action rifles 29825

Forend Screw for Break-Action Muzzleloaders

1.99

Musket Cap Nipple 10405

Musket Cap Nipple - For CVA Rifles (6x1 mm)

4.99

Ol Reliable Replacement Nipples AC1481

Quality heat treated steel with a fire funnel design similar to the perfect nipple. 3 per pack.

10.99

OPEN SIGHT HOLE PLUG SCREW 29256

Open Sight Hole Plug Screw QTY - 1 Works on all CVA Rifles & Muzzleloaders

1.00

Perfect Nipple AC1422

Concentrates spark, delivering 100% of the spark to the powder charge. 50% more than any other.

7.99

DS400 SeriesQR Saaembly Pak.

Assembly pack for the Durasight DS400 Quick release rings.

4.99

Replacement QRBP for CVA Wolf Optima and Accura V2 Muzzleloader Rifles AC1611

The Replacement QRBP is short for Quick Removable Breech Plug, this breech plug will only work on a Wolf, Optima,& Accura V2 rifles after it has been fitted to the barrel. This can easily be done with the QRBP fitting tool, that comes with the QRBP as well as simple step by step instructions. Each QRBP that comes equipped on 2010 CVA Wolf, Optima,& Accura V2 rifles is fitted to that particular barrel that it came with. This is why it is so easy to install and remove. Once the QRBP is properly installed no tools are required for installing or removing QRBP. This QRBP will NOT work in the CVA Apex Muzzleloader or any other muzzleloader that was not originally set up for QRBP. If it is attempted CVA is not responsible for any damage that can or will happen.

24.99

SCOPE HOLE PLUG SCREW 28254

Scope Hole Plug Screw QTY - 1 Works on all CVA Rifles & Muzzleloaders made after 1999

ONLY COMES IN BLUED STEEL

1.00

Shim Kit for Firing Pin Bushing SHIM.KIT

PLEASE READ BEFORE YOU PURCHASE
The purpose of the Shim Kit is ONLY to bring your firing pin retainer flush with the frame. This Shim Kit will NOT reduce the blow back caused from the use of 209 shot shell primers. If you attempt to force you firing pin retainer out beyond being level with the frame you make cause the rifle not open and or close. CVA is not responsible for any one that miss uses this shim kit. If you have any question or concerns about this kit due to any articles you may have read on the internet. Please fill free to contact us directly by clicking here now: http://www.cva.com/contact.php or calling us at 770-449-4687

Shim Kit for Firing Pin Bushing adjustmet - SIX Shims total 2 - (.002") 1 - (.005") 2 - (.010") 1 - (.020")

7.99

Spring for Conventional In-Line Muzzleloader 28274

Spring for Conventional In-Line Muzzleloader, This spring pushes the Bolt forward for most all conventional In-Line Muzzleloaders For Example - Eclipse,Eclipse Magnum, Eclipse Hunter, Stag Horn, Stag Horn Magmum, ETC...

(This Spring goes in front of the Breech cap)

2.99

BLACKHORN QRBP FOR ACC,OPT,WLF AC1611BH

BLACKHORN QRBP FOR ACC,OPT,WLF

36.99

Firing Pin Spring for Kodiak rifle 29238

Firing pin spring for firing pin for a Kodiak rifle and others

4.99

Firing pin housing for Kodiak rifle 29241

Firing pin housing for a Kodiak rifle and others

4.99

Firing Pin for Kodiak rifle 29227

firing pin for a firing pin set for a Kodiak rifle and others

4.99

NW BREECHPLUG (NEW) 32366

Shoots musket caps. You will need the tool, part number 32182 to install it, as well as the NW Fire.Kit firing pin system in your gun to shoot musket caps.

Required for Northwest compliance

20.95

(1 set) Musket Cap Firing pin retainer-bushing set NW Fire.Kit

(1 set) Musket Cap Firing pin retainer-bushing set for Break –Action Muzzleloaders made in 2010 and newer NW Conversion
Required for North West Compliance.

12.99

QRBP Breechplug Installation Tool 30447

For use to initially install new breechplug if purchased separately from the gun. To use, tighten the breechplug firmly into the barrel to fit the threads. Tighten it tighter than you can get with your hands and then loosen. If it is not done far enough, the rifle will not cock. After it has been used to install, you will not need to use it again. Can also help fix a rifle that will not cock.

3.99

Stainless Steel Sight Hole Plug Screw 31246

Stainless Steel Sight Hole Plug Screw QTY - 1 Works on all CVA Rifles & Muzzleloaders

1.99

PLUG SCREW (SS) FOR PP220SM AC1628X-PLUG-SS

Stainless Steel Scope Hole Plug Screw. Per 1.

1.99

Rear sight for Fire Bolt 20638

Rear sight for Fire Bolt

8.99

Front sight for firebolt rifle 20639

Front sight for firebolt rifle

8.99

Blackhorn 209 Breechplug for TC4008 & TC4009 series barrels 31655B

Blackhorn 209 Breechplug for TC4008 & TC4009 series barrels

21.95

BLACKHORN QRBP NON-APEX (D25) 30570A-BLACK

BLACKHORN QRBP NON-APEX (D25)

22.99

QRBP FOR WOLF/OPT/ACCURA RIFLE 30570-BLACK

QRBP FOR WOLF/OPT/ACCURA RIFLE

25.99

FOS SET FOR OPTIMA MZ PISTOL AC1628

Durasight Fiber Optic Sight set for the Optima Pistol. For the shooter who would prefer open sights on their pistol. The ultimate in visibility and durability - these sights are guaranteed for life!

32.99

NW BREECHPLUG TOOL 32182

For use installing the CVA NW Breechplug.

2.99

Barrel Lug to Attach Forearm 30072M

Barrel lug to attach forearm on pre-2010 rifles.

5.99

SCREW M4x35 DIN 966- use 32258

1.50

Buttstock attaching bolt 31128

Bolt to attach buttstock to rifles. For use on 2010 or newer rifles.

1.99

DS400 SERIES QR ASSEMBLY PACK SP002

Assembly pack for the Durasight DS400 Quick release rings.

4.99

ILLUMINATOR FRONT SIGHT- DIKAR 30370

Front fiber optic open sight from Durasight Durabright package for CVA muzzleloaders. Screw not included

8.99

WILLIAMS REAR FIBER OPTC SIGHT 71113

William's rear fiber optic sight for CVA Muzzleloaders.

9.99

DURABRIGHT F.O SIGHTS-CVA/TRAD DS001

The ultimate in visibility and durability- these fiber optic open sights will work on all In-line CVA and Traditions Muzzleloaders and break actions muzzleloader. This is the same as WA0000 and AC1622

27.99